HannYa Reliability Destruction Thermal Shock Test Chamber 42L Air Cooled CE Certificated

Machine introduction:

CE Certificated 42L Air Cooled Thermal Shock Test Machine For Reliability Destruction Testing is metal, plastic, rubber, electronics and other industries necessary testing equipment. For the continuous exposure to extremely high temperature, very low temperature environment, instant exposure of the material structure or composite material tolerance, can be detected in the shortest possible time due to thermal expansion and contraction caused by chemical or physical damage.

CE Certificated 42L Air Cooled Thermal Shock Test Machine For Reliability Destruction Testing meets today's environmental stress screening requirements and is proven in installations around the world. It's an economical way to achieve ESS or thermal shocks for rapid component temperature changes.

The thermal shock chamber of this type is provided with three dampers, i.e., one for opening or closing the gas outlet and intake of the high-temperature air conditioning unit, another for the air outlet and inlet of the outside air supplying unit, and another for the gas outlet and intake of the low-temperature air conditioning unit.

Standards:

1.GB/T2423.1-1989
2.GB/T2423.2-1989
3.GB/T2423.22-1989
4.GJB150.5-86
5.GJB360.7-87
6.GJB367.2-87 405
7.SJ/T10187-91Y73
8.SJ/T10186-91Y73
9.IEC68-2-14
10.GB/T 2424.13-2002
11.GB/T 2423.22-2002
12.QC/T17-92
13.EIA 364-32

Features: 

Since the cold chamber need huge cooling capacity for shocking, the chamber’s cooling mode is often designed as air-cooled or water-cooled.

Air-cooled type need installation environment:

• The room must be equipped with exhauster and air conditioner to make sure heat dissipation timely.
• It’s applied to small power products and cool areas.

Water-cooled type need installation conditions:

• The customer must prepare water pipe and water tower (located outside) accordingly.
• The water must be pure, or it will block the pipes and result in some maintenance trouble with time going.
• It’s often applied to large system with the features of better heat dissipation, longer service time, low noise but slightly higher price if count the fee of water tower and water pipes.

Specifications: